Tractors representing the new COMPAX model range are universal, reliable, and compact machines. Thanks to easy handling and sufficient power, the new tractors are perfect for maintenance of villages, company pre- mises, sports grounds, light agricultural works as well as gardening. Quality construction and low operating costs make these machines the right choice.
Engine
The new tractors are powered by Yanmar engines. These reliable water-cooled engines have enough power for your everyday tasks and at the same time boasts of low fuel consumption. COMPAX 32 models have a durable 3-cylinder engine under the bonnet. All the new models comply with the Stage 3A emission standards.
Transmission
Compax 32 is equipped with 8/2 constant mesh transmission
Hydraulics
The maximum lifting capacity of the rear three-point hitch can reach up to 7,5 kN depending on the model allowing you to work with a wide range of implements.
Design
All models are produced in the open version equipped with a protective ROPS frame and a fixed steering wheel. The ergonomic layout of the controls makes working with the tractor easier and simpler and contributes to driver comfort. The power steering and 4WD allow the tractors to perform a wide range of work tasks.
| Parameters | Units | Global Compax 26 | 29 |
|---|---|---|
| ENGINE | ||
| Type/Emission standard | • | 4 Stroke & Water Cooled / Stage IIIA |
| Max. power (R120/EHK 120) | kW | 17.9 | 20.1 |
| HP | 24 | 27 | |
| Rated Speed | rpm | 2700 | 2800 |
| No. of Cylinders / Valves | • | 4 Cylinders/8 |
| Aspiration | • | Natural |
| Bore / Stroke | mm | 73x78 |
| Displacement | cm3 | 1306 |
| Max. Torque | Nm | 72@2200 |
| TRANSMISSION | ||
| Type | • | Sliding Mesh |
| Clutch type | • | - | Single (dry fritction plate)/Diaphragm type |
| Shifting | • | Manual |
| No. of Gears (F/R) | • | 6/2 |
| Max. Speed | km/h | 24.68 |
| Min. Speed | km/h | 1.68 |
| PTO | ||
| Type | • | Two speed |
| Rear PTO revolutions | rpm | 540/810 | 540/1000 |
| Max. Power of Rear PTO | HP | 19.1 | 24 |
| Rear PTO shaft grooves | • | 1-3/8 SAE STD |
| HYDRAULICS | ||
| Type | • | ADDC |
| Gear Pump Capacity | l/min | 18 |
| Rear Hydraulic remotes (Quickcouplers) | • | Spool Valve (Double Acting) |
| Three Point Hitch | ||
| Control / Category | • | ADDC/CAT-1 |
| Max. Lift Capacity | kg | 7.5 |
| Platform | ||
| Roof / Mirrors | • | ROPS/Yes |
| Steering Wheel | • | Fixed |
| Electrical System | ||
| Beacon | • | Optional |
| 7-pole socket | Yes | |
| Undercarriage | ||
| Drive system | • | 4 WD |
| Operating brakes | • | OTB |
| Fuel tank | l | 18 |
| Brakes | • | Oil Immersed Break |
| Tires | • | Front - 5x12, Rear - 8.3x20 |
| Other Specification | ||
| Max. Front Ballast | kg | 60 |
| Max. Length / Width / Height | mm | 2450/1095/1376 |
| Min. Ground Clearance | mm | 305 |
| Wheel base | mm | 1420 |